Free roofing calculator

Roof square calculator

This roof square calculator turns the flat footprint of a roof and its pitch into the true roof area and the number of roofing squares to order. One square is 100 square feet of roof. Multiply the footprint by the pitch factor, add waste, and divide by 100.

ft

Eave to eave, including the overhangs.

ft

Rake to rake, including the overhangs.

/ 12

A 6/12 roof rises 6 inches for every 12 inches it runs. Enter 6.

%

Extra for cuts and starter rows. 10% is a common starting point; use 0 for the bare roof.

Formula: roof area = footprint x pitch factor, where the pitch factor is the square root of (1 + (rise / 12) squared). Squares = roof area x (1 + waste) / 100.

Roofing squares with 10% waste

18.45squares

Order 19 squares. The roof itself is 1,677 square feet.

Footprint
1,500 sq ft
Pitch
6/12 (26.6 degrees)
Pitch factor
1.118
Roof area
1,677 sq ft
Squares before waste
16.77
Waste added
1.68 squares
Squares with waste
18.45

Chart

Roofing squares by footprint and pitch

Squares of roof surface for common footprints, before waste. Add your waste allowance on top.

Roofing squares by flat footprint and roof pitch, before waste
Footprint4/126/128/1210/1212/12
1,000 sq ft10.511.212.013.014.1
1,500 sq ft15.816.818.019.521.2
2,000 sq ft21.122.424.026.028.3
2,500 sq ft26.428.030.032.535.4
3,000 sq ft31.633.536.139.142.4

How it works

From footprint to squares

1. Measure the footprint. Measure the roof as if you were looking down on it from above: the length from eave to eave and the width from rake to rake, with the overhangs included. You can take it from the plans, from the ground, or from an aerial image. Length times width is the footprint.

2. Find the pitch. Pitch is how many inches the roof rises for every 12 inches it runs. If you have the angle instead, use the roof pitch to degrees converter to turn it into a pitch first.

3. Apply the pitch factor. A sloped roof has more surface than the flat ground it covers. The pitch factor is the square root of 1 plus (rise / 12) squared: 1.054 at 4/12, 1.118 at 6/12 and 1.414 at 12/12. Footprint times pitch factor is the roof area.

4. Add waste and divide by 100. Add your waste allowance, then divide by 100 to get roofing squares. The calculator also rounds up to the whole number of squares to order. Once you know the squares, the roofing labor cost per square calculator prices the crew time for the job.

When the pitch changes. If a porch or an addition has a lower pitch than the main roof, run the roof square calculator once for each section and add the squares together. Do not mix two pitches in one footprint.

Questions

What roofers ask about this

How many square feet is a roofing square?
100 square feet of roof surface. A roof with 2,400 square feet of surface is 24 squares, before any waste is added.
How do I calculate roofing squares?
Measure the footprint flat, overhangs included, and multiply it by the pitch factor to get the true roof area. Then divide by 100. A 1,200 square foot footprint at 6/12 is 1,200 x 1.118 = 1,342 square feet, or 13.4 squares.
How many squares is a 2,000 square foot roof?
It depends on whether 2,000 is the flat footprint or the roof surface. If it is the roof surface, it is 20 squares. If it is the footprint of a 6/12 roof, the surface is 2,236 square feet, or 22.4 squares, and about 24.6 with 10% waste.
How much waste should I add to roofing squares?
IKO's estimating guide uses 10% in its worked example, and that is a fair starting point for a simple roof. Roofs with many valleys, hips and dormers lose more to cuts, so check the figure against your own past jobs.
Does the roof square calculator work for a hip roof?
Yes, as long as every plane has the same pitch. The roof area of any roof with one pitch is the flat footprint times the pitch factor, whatever the shape. If parts of the roof have different pitches, work out each part on its own and add them.
What is the pitch factor for a 6/12 roof?
1.118. It is the square root of 1 plus (6 / 12) squared. Every square foot of flat footprint becomes 1.118 square feet of roof.

Sources

Where the numbers come from

  1. Owens Corning, Roofing Glossary. Square: a unit of roof measure covering 100 square feet. Slope: the rise in inches against the run in inches
  2. IKO, Estimating How Much Roofing Is Required. Measure the projected horizontal area, then multiply by the area/rake factor for the slope (1.054 at 4/12, 1.118 at 6/12, 1.414 at 12/12) to get the actual roof area; the worked example adds a 10% waste allowance

Next step

Get your roofing company recommended by AI in 90 days.

We run the questions your customers ask ChatGPT and Google AI Mode in your city and show you who gets recommended today. Then we fix the pages, listings and answers that decide it.

$999 a month, 3-month minimum, then month to month. If AI is not recommending you for 3 of your 5 questions by day 90, you get every dollar back.

Book a free AI strategy call

One business per industry per city. Founder led. Dated proof every 2 weeks.