Free plumbing calculator

GPM calculator

This GPM calculator gives you the flow rate in gallons per minute two ways. Time a bucket filling and it divides gallons by seconds and multiplies by 60. Or enter a pipe's inside diameter and the flow velocity, and it uses GPM = 2.448 x diameter squared x velocity.

gallons

A 5 gallon bucket is the usual choice.

seconds

Start the timer as you open the valve, stop it at the mark.

Formula: GPM = gallons / seconds x 60.

Flow rate

10.00GPM

5 gallons in 30 seconds is 10.00 gallons per minute.

Gallons per second
0.167
Gallons per minute
10.00
Gallons per hour
600
Seconds to fill 1 gallon
6.0

Chart

Gallons per minute from a bucket test

Read your fill time down the left. The columns give the flow rate for a 1 gallon jug and a 5 gallon bucket.

Gallons per minute by time to fill a 1 gallon and a 5 gallon container
Time to fill1 gallon (GPM)5 gallons (GPM)
10 seconds6.030.0
12 seconds5.025.0
15 seconds4.020.0
20 seconds3.015.0
25 seconds2.412.0
30 seconds2.010.0
40 seconds1.57.5
60 seconds1.05.0

Chart

Pipe flow in GPM by diameter and velocity

GPM for a full pipe at each inside diameter and velocity, from GPM = 2.448 x d squared x v.

Gallons per minute in a full pipe by inside diameter and flow velocity
Inside diameter2 ft/s4 ft/s5 ft/s8 ft/s
0.5 in1.22.43.14.9
0.75 in2.85.56.911.0
1 in4.99.812.219.6
1.25 in7.615.319.130.6
1.5 in11.022.027.544.1
2 in19.639.249.078.3

How it works

The two ways to measure flow

Bucket test. This is the way to measure what a fixture, a hose bib or a well pump really delivers. Fill a container of known size and time it. Gallons divided by the minutes it took is the flow rate. Because most people time in seconds, the GPM calculator divides by the seconds and multiplies by 60. Open the valve all the way, and repeat the test a few times, because the flow can change from one fill to the next.

Pipe flow. Flow rate is the area of the pipe times how fast the water moves through it. Work that out in square inches and feet per second and turn cubic feet into gallons, and every constant folds into one number: GPM = 2.448 x d squared x v, with d the inside diameter in inches and v the velocity in feet per second. Spears gives the same rule with velocity in feet per minute and a constant of 0.0408, which is 2.448 divided by 60.

Why diameter is squared. The area of a circle grows with the square of its diameter. Double the inside diameter and, at the same velocity, the pipe carries four times the water. That is why the chart above climbs so fast down each column.

What the formula leaves out.It tells you the flow at a velocity you already know. It does not work out friction loss, pressure drop or fixture demand for sizing a system; use your plumbing code and the pipe maker's data for that. For heating and cooling numbers on the same job, see the free HVAC calculators.

Questions

What plumbers ask about this

How do you calculate GPM?
Divide the gallons by the minutes it took for them to flow. With a stopwatch in seconds, that is gallons divided by seconds, times 60. A 5 gallon bucket that fills in 30 seconds is 5 / 30 x 60 = 10 GPM.
How do I do a bucket test for GPM?
Put a 5 gallon bucket under the open fixture or hose bib, start the timer as you open the valve fully, and stop it when the water reaches the 5 gallon mark. Then divide 5 by the seconds and multiply by 60. Run it two or three times and average the results.
What is the formula for GPM in a pipe?
GPM = 2.448 x the inside diameter in inches, squared, x the velocity in feet per second. A pipe 1 inch inside with water at 5 feet per second carries 2.448 x 1 x 5 = 12.24 GPM. The formula assumes the pipe is running full.
How do I convert GPM to velocity in a pipe?
Turn the same formula around: velocity in feet per second = GPM / (2.448 x inside diameter squared). 10 GPM through a pipe 1 inch inside is 10 / 2.448 = 4.08 feet per second.
Should I use the nominal pipe size or the inside diameter?
The inside diameter. Nominal size is a name, and the real bore changes with the material and the wall thickness, so two pipes sold under the same nominal size can have different inside diameters. Take the number from the maker's chart for the exact pipe.
How many GPM is a 5 gallon bucket in 20 seconds?
15 GPM. 5 gallons divided by 20 seconds is 0.25 gallons per second, and 0.25 x 60 is 15 gallons per minute.

Sources

Where the numbers come from

  1. Alabama Cooperative Extension System, ANR-2827, NPTC Tools of the Trade: Measuring Water Flow Rate. The bucket method: time how long a 5 gallon bucket takes to fill, turn the seconds into minutes, and divide the gallons by the minutes
  2. Spears Manufacturing, Industry Piping Formulas (IP-4). Gallons per minute through pipe: GPM = 0.0408 x inside diameter in inches squared x velocity in feet per minute. With feet per second, 0.0408 x 60 = 2.448
  3. LibreTexts, Water 131: Advanced Water Mathematics, 8.3 Flow Rate. Flow rate = area x velocity, and 448.8 gallons per minute in 1 cubic foot per second

Next step

Get your plumbing company recommended by AI in 90 days.

We run the questions your customers ask ChatGPT and Google AI Mode in your city and show you who gets recommended today. Then we fix the pages, listings and answers that decide it.

$999 a month, 3-month minimum, then month to month. If AI is not recommending you for 3 of your 5 questions by day 90, you get every dollar back.

Book a free AI strategy call

One business per industry per city. Founder led. Dated proof every 2 weeks.